Rockwell Automation 1771-QB Linear Pos. - Manual (Page 10)

Preface
PĆ2
Chapter Describes: Title
Appendix E Command Block command block word assignments
Appendix F Motion Block motion block word assignments
Appendix G Hexadecimal Data Table Form hexadecimal data worksheets
Appendix H Data Formats valid data formats
Appendix I Product Specifications 1771ĆQB product specifications
Read this manual if you intend to install or use the Linear Positioning Module
(Cat. No. 1771-QB).
To use the module, you must be able to program and operate an Allen-Bradley
PLC. In particular you must be able to program block transfer instructions.
In this manual, we assume that you know how to do this. If you don’t, refer to
the User Manual for the PLC you’ll be programming.
Consult the Allen-Bradley Industrial Computer Division Publication Index
(SD 499) if you would like more information about your modules or PLCs. This
index lists all available publications for Allen-Bradley programmable controller
products.
The Hydraulics Configuration and Operation Option (Cat. No. 6190-HCO)
operates within the ControlView Core (Cat. No. 6190-CVC) environment to
provide full configuration and realtime monitoring for the Linear Positioning
Module. Both software packages are available from:
Allen-Bradley Company, Inc.
1201 South Second Street
Milwaukee, WI 53204
(414) 382-2000
Servo Analyzer is a software package that aids in tuning the axes by letting you
display an axis profile as you tune it. The resulting graphics may be plotted,
printed or saved to a file. The software is available from:
Computer Software Design
P.O. Box 962
Roseburg, OR 97470
(503) 673-8583
Audience
Related Publications
Related Software