Rockwell Automation 1771-QB Linear Pos. - Manual (Page 67)

Interpreting ModuleĆtoĆPLC Data
(READS)
Chapter 6
6Ć6
Bit 10 – Start
The start bit reflects the state of the hardware start input (0 = no start,
1 = start).
Bit 11 – Stop
The stop bit reflects the state of the hardware stop input (0 = stop, 1 = no stop).
Important: The hardware stop is a low-true signal.
Bit 12 – Jog Forward
The jog forward bit reflects the state of the jog forward hardware input
(0 = no jog, 1 = jog).
Bit 13 – Jog Reverse
The jog reverse bit reflects the state of the jog reverse hardware input
(0 = no jog, 1 = jog).
Bit 14 – Input 1
This bit reflects the state of hardware input 1 (0 = off, 1 = on).
Bit 15 – Input 2
This bit reflects the state of hardware input 2 (0 = off, 1 = on).