Set system – Dell PowerEdge VRTX User Manual
Page 104
104
System Management Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\System_Management.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Parameters
N/A
Default Usage
N/A
Command Mode
Global Configuration mode
User Guidelines
Use the show cpu counters command to display the CPU traffic counters.
Example
The following example enables counting CPU traffic.
console(config)# service cpu-counters
set system
The set system Privileged EXEC mode command puts the device into various
modes depending on the parameters entered.
Syntax
set system mode {
layer-2-plus-IPv4-static-routing
|
layer-2-only
}
Parameters
•
layer-2-plus-IPv4-static-routing
—Specifies that the device functions as a
IPv4 router
•
layer-2-only—Specifies that the device functions as a switch layer 2 only.
Default Configuration
The default configuration is switch mode (Layer 2), with 4 QoS queues.
Command Mode
Privileged EXEC mode