Dell PowerEdge VRTX - Manual (Page 290)

290 TACACS+ Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\TACACS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Example
The following example configures the VLAN 10 as the source interface.
console(config)# tacacs-server host source-interface-ipv6
vlan 100
show tacacs
Use the show tacacs Privileged EXEC mode command to display
configuration and statistical information for a TACACS+ server.
Syntax
show tacacs [ ip-address ]
Parameters
• ip-address —Specifies the TACACS+ server name, IPv4 or IPv6 address.
Default Configuration
If ip-address is not specified, information for all TACACS+ servers is
displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays configuration and statistical information for
all TACACS+ servers
console# show tacacs
IP address Status Port Single TimeOut Priority
Connection
--------- --------- ---- --------- ------ --------
172.16.1.1 Connected 49 No Global 1
Global values
-------------
Time Out: 3