Spanning-tree commands, Spanning-tree, Spanning-tree mode – Dell PowerEdge VRTX User Manual
Page 491: 28 spanning-tree commands
Template Last Updated - 2/7/2007
Spanning-Tree Commands
491
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
30
Spanning-Tree Commands
spanning-tree
Use the spanning-tree Global Configuration mode command to enable
spanning-tree functionality. Use the no form of this command to disable the
spanning-tree functionality.
Syntax
spanning-tree
no spanning-tree
Parameters
N/A
Default Configuration
Spanning-tree is enabled.
Command Mode
Global Configuration mode
Example
The following example enables spanning-tree functionality.
console(config)# spanning-tree
spanning-tree mode
Use the spanning-tree mode Global Configuration mode command to select
which Spanning Tree Protocol (STP) protocol to run. Use the no form of this
command to restore the default configuration.