Qos trust (global) – Dell PowerEdge VRTX User Manual
Page 789
Quality of Service (QoS) Commands
789
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\QoS.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
This command is only available in QoS advanced mode.
Syntax
qos map dscp-dp
dscp-list
to
dp
no qos map dscp-dp [
dscp-list
]
Parameters
• dscp-list—Specifies up to 8 DSCP values, with values separated by a
space. (Range: 0–63)
•
dp—Specifies the Drop Precedence value to which the DSCP values are
mapped. (values: 0,2) where 2 is the highest Drop Precedence).
Default Configuration
All the DSCPs are mapped to Drop Precedence 0.
Command Mode
Global Configuration mode
Example
The following example maps DSCP values 25, 27 and 29 to Drop Precedence
2.
console(config)# qos map dscp-dp 25 27 29 to 2
qos trust (Global)
Use the qos trust Global Configuration mode command to configure the
system to the basic mode and trust state. Use the no form of this command to
return to the default configuration.
Syntax
qos trust
{cos | dscp}
no qos trust