Dell PowerEdge VRTX - Manual (Page 34)

34 Preface
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\CLI_Preface_DellPlasma.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Using these passwords, you can raise your user level by entering the
command: enable and the password for level 15. The higher level holds only
for the current session.
The disable command returns the user to a lower level.
To create a user and assign it a user level, use the username command. Only
users with command level 15, can create users at this level.
Examples
Create passwords for level 15 (by the administrator):
console#configure
console<conf># enable password level 15
level15@abc
console<conf>#
Create a user with user level 1:
console#configure
console<conf> username john password john1234
privilege 1
console<conf>
Switch between Level 1 to Level 15. The user must know the password:
console#
console# enable
Enter Password: ****** (this is the password for
level 15 - level15@abc)
console#
If authentication of passwords is performed on RADIUS or TACACS+
servers, the passwords assigned to user level 15 must be configured on the
external server and associated with the $enable15$ user names. See the
Authentication, Authorization and Accounting chapter for details.