Dell PowerEdge VRTX - Manual (Page 444)

444 Address Table Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
User Guidelines
A MAC address can be displayed in IP format only if it is within the range
0100.5e00.0000 through 0100.5e7f.ffff.
Multicast router ports (defined statically or discovered dynamically) are
members in all MAC groups.
Ports that were defined via the
bridge multicast forbidden forward-all
command are displayed in all forbidden MAC entries.
Changing the Multicast mode can move static Multicast addresses that are
written in the device FDB to a shadow configuration because of FDB hash
collisions.
Example
The following example displays bridge Multicast address information.
console# show bridge multicast address-table
Multicast address table for VLANs in MAC-GROUP bridging mode:
Vlan MAC Address Type Ports
---- ----------------- -------------- -----
8 01:00:5e:02:02:03 Static 1-2
Forbidden ports for Multicast addresses:
Vlan MAC Address Ports
---- ----------------- -----
8 01:00:5e:02:02:03 gi0/4
Multicast address table for VLANs in IPv4-GROUP bridging mode:
Vlan MAC Address Type Ports
---- ----------------- -------------- -----
1 224.0.0.251 Dynamic gi0/2
Forbidden ports for Multicast addresses:
Vlan MAC Address Ports
---- ----------------- -----
1 232.5.6.5
1 233.22.2.6