Dell PowerEdge VRTX - Manual (Page 446)

446 Address Table Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
show bridge multicast address-table static
Use the show bridge multicast address-table static Privileged EXEC mode
command to display the statically-configured Multicast addresses.
Syntax
show bridge multicast address-table static [vlan vlan-id] [all]
show bridge multicast address-table static [vlan vlan-id] [address mac-
multicast-address] [mac| ip ]
show bridge multicast address-table static [vlan vlan-id] [address ipv4-
multicast-address] [source ipv4-source-address]
show bridge multicast address-table static [vlan vlan-id] [address ipv6-
multicast-address] [source ipv6-source-address]
Parameters
• vlan vlan-id—Specifies the VLAN ID.
•
address—Specifies the Multicast address. The possible values are:
–
mac-multicast-address—Specifies the MAC Multicast address.
– ipv4-multicast-address—Specifies the IPv4 Multicast address.
– ipv6-multicast-address—Specifies the IPv6 Multicast address.
• source—Specifies the source address. The possible values are:
–
ipv4-address—Specifies the source IPv4 address.
– ipv6-address—Specifies the source IPv6 address.
Default Configuration
When all/mac/ip is not specified, all entries (MAC and IP) will be displayed.
Command Mode
Privileged EXEC mode
User Guidelines
A MAC address can be displayed in IP format only if it is within the range
0100.5e00.0000–- 0100.5e7f.ffff.