Dell PowerEdge VRTX - Manual (Page 737)

ACL Commands 737
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\ACL.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
• source-prefix/length —The source IPv6 network or class of networks about
which to set permit conditions. This argument must be in the format
documented in RFC 3513 where the address is specified in hexadecimal
using 16-bit values between colons.
• destination-prefix/length —The destination IPv6 network or class of
networks about which to set permit conditions. This argument must be in
the format documented in RFC 3513 where the address is specified in
hexadecimal using 16-bit values between colons.
• dscp number —Specifies the DSCP value. (Range: 0–63)
• precedence number —Specifies the IP precedence value.
• icmp-type —Specifies an ICMP message type for filtering ICMP packets.
Enter a number or one of the following values: destination-unreachable
(1), packet-too-big (2), time-exceeded (3), parameter-problem (4), echo-
request (128), echo-reply (129), mld-query (130), mld-report (131),
mldv2-report (143), mld-done (132), router-solicitation (133), router-
advertisement (134), nd-ns (135), nd-na (136). (Range: 0–255)
• icmp-code —Specifies an ICMP message code for filtering ICMP packets.
(Range: 0–255)
• destination-port —Specifies the UDP/TCP destination port. You can enter
a range of ports by using a hyphen. E.g. 20 - 21. For TCP enter a number or
one of the following values: bgp (179), chargen (19), daytime (13), discard
(9), domain (53), drip (3949), echo (7), finger (79), ftp (21), ftp-data 20),
gopher (70), hostname (42), irc (194), klogin (543), kshell (544), lpd (515),
nntp (119), pop2 (109), pop3 (110), smtp (25), sunrpc (1110, syslog (514),
tacacs-ds (49), talk (517), telnet (23), time (37), uucp (117), whois (43),
www (80). For UDP enter a number or one of the following values: biff
(512), bootpc (68), bootps (67), discard (9), dnsix (90), domain (53), echo
(7), mobile-ip (434), nameserver (42), netbios-dgm (138), netbios-ns
(137), non500-isakmp (4500), ntp (123), rip (520), snmp (161), snmptrap
(162), sunrpc (111), syslog (514), tacacs (49), talk (517), tftp (69), time
(37), who (513), xdmcp (177). (Range: 0–65535)
• source-port —Specifies the UDP/TCP source port. Predefined port names
are defined in the destination-port parameter. (Range: 0–65535)