Dell PowerEdge VRTX - Manual (Page 398)

398 Green Ethernet
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\750_Green_Ethernet.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Syntax
green-ethernet energy-detect
no green-ethernet energy-detect
Parameters
N/A
Default Configuration
Disabled.
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
Energy-Detect only works on copper ports. When a port is enabled for auto
selection, copper/fiber Energy-Detect cannot work.
It takes the PHY ~5 seconds to fall into sleep mode when the link is lost after
normal operation.
Example
console(config)# interface gi0/1
console(config-if)# green-ethernet energy-detect
green-ethernet short-reach (global)
Use the green-ethernet short-reach Global Configuration mode command to
enable Green-Ethernet Short-Reach mode globally. Use the no form of this
command to disabled it.
Syntax
green-ethernet short-reach
no green-ethernet short-reach
Parameters
N/A