Dell PowerEdge VRTX - Manual (Page 363)

Ethernet Configuration Commands 363
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Ethernet.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Default Configuration
The interface does not have a description.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example adds the description ‘SW#3’ to gi0/4.
console(config)# interface gi0/4
console(config-if)# description SW#3
speed
Use the speed Interface (Ethernet, Port Channel) Configuration mode
command to configure the speed of a given Ethernet interface when not
using auto-negotiation. Use the no form of this command to restore the
default configuration.
Syntax
speed {10 | 100 | 1000 |10000}
no speed
Parameters
• 10—Forces10 Mbps operation
•
100—Forces 100 Mbps operation
• 1000—Forces 1000 Mbps operation
• 10000—Forces 10000 Mbps operation
Default Configuration
The port operates at its maximum speed capability.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode