Dell PowerEdge VRTX - Manual (Page 459)

LLDP Commands 459
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Default Configuration
Enabled
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
LLDP manages LAG ports individually. LLDP data received through LAG
ports is stored individually per port.
LLDP operation on a port is not dependent on the STP state of a port. I.e.
LLDP frames are received on blocked ports.
If a port is controlled by 802.1x, LLDP operates only if the port is authorized.
Example
console(config)# interface gi0/1
console(config-if)# lldp receive
lldp timer
Use the lldp timer Global Configuration mode command to specify how
often the software sends LLDP updates. Use the no form of this command to
restore the default configuration.
Syntax
lldp timer seconds
no lldp timer
Parameters
timer seconds —Specifies, in seconds, how often the software sends LLDP
updates (range: 5-32768 seconds).
Default Configuration
30 seconds.