Dell PowerEdge VRTX - Manual (Page 147)

Configuration & Image File Commands 147
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Configuration_Image.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Default Configuration
This command has no arguments or keywords.
Command Mode
Privileged EXEC mode
User Guidelines
The following keywords and URL prefixes are supported
• flash://— URL of the FLASH file.
• startup-config—
Startup configuration file.
•
WORD — Name of file (e.g. backup-config).
*.sys and *.prv files cannot be renamed.
Example
The following example renames the configuration backup file.
console# rename backup-config m-config.bak
boot system
The boot system Privileged EXEC mode command specifies the active
system image file that will be loaded by the device at startup.
Syntax
boot system {image-1 | image-2}
Parameters
• image-1—Specifies that image-1 is loaded as the system image during the
next device startup.
• image-2—Specifies that image-2 is loaded as the system image during the
next device startup.
Default Configuration
This command has no default configuration.