Dell PowerEdge VRTX - Manual (Page 428)

428 Address Table Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
Do not enable unregistered Multicast filtering on ports that are connected to
routers, because the 224.0.0.x address range should not be filtered. Note that
routers do not necessarily send IGMP reports for the 224.0.0.x range.
You can execute the command before the VLAN is created.
Example
The following example specifies that unregistered Multicast packets are
filtered on gi0/1:
console(config)# interface gi0/1
console(config-if)# bridge multicast unregistered filtering
bridge multicast forward-all
Use the bridge multicast forward-all Interface (VLAN) Configuration mode
command to enable forwarding all multicast packets for a range of ports or
port channels. Use the no form of this command to restore the default
configuration.
Syntax
bridge multicast forward-all {add | remove} {ethernet interface-list | port-
channel port-channel-list}
no bridge multicast forward-all
Parameters
• add—Forces forwarding of all Multicast packets.
•
remove—Does not force forwarding of all Multicast packets.
• ethernet interface-list —Specifies a list of Ethernet ports. Separate
nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen
to designate a range of ports.