Dell PowerEdge VRTX - Manual (Page 493)

Spanning-Tree Commands 493
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Spanning-Tree.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Syntax
spanning-tree forward-time seconds
no spanning-tree forward-time
Parameters
seconds—Specifies the spanning-tree forward time in seconds. (Range: 4–30)
Default Configuration
15 seconds.
Command Mode
Global Configuration mode
User Guidelines
When configuring the forwarding time, the following relationship should be
maintained:
2*(Forward-Time - 1) >= Max-Age
Example
The following example configures the spanning tree bridge forwarding time to
25 seconds.
console(config)# spanning-tree forward-time 25
spanning-tree hello-time
Use the spanning-tree hello-time Global Configuration mode command to
configure how often the device broadcasts Hello messages to other devices.
Use the no form of this command to restore the default configuration.
Syntax
spanning-tree hello-time seconds
no spanning-tree hello-time
Parameters
seconds—Specifies the spanning-tree Hello time in seconds. (Range: 1–10)