Lacp timeout – Dell PowerEdge VRTX User Manual
Page 608
608
Link Aggregation Control Protocol Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LACP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Syntax
lacp port-priority
value
no lacp port-priority
Parameters
value—Specifies the port priority. (Range: 1use the no form of this
command65535)
Default Configuration
The default port priority is 1.
Command Mode
Interface (Ethernet) Configuration mode
Example
The following example sets the priority of gi0/1.
console(config)# interface gi0/1
console(config-if)# lacp port-priority 247
lacp timeout
Use the lacp timeout Interface (Ethernet) Configuration mode command to
assign an administrative LACP timeout to an interface. Use the no form of
this command to restore the default configuration.
Syntax
lacp timeout
{long | short}
no lacp timeout
Parameters
• long—Specifies the long timeout value.
•
short—Specifies the short timeout value.