Dell PowerEdge VRTX - Manual (Page 470)

470 LLDP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Example
console(config)# lldp med fast-start repeat-count 4
lldp med network-policy (global)
Use the lldp med network-policy Global Configuration mode command to
define a LLDP MED network policy.
The lldp med network-policy command creates the network policy, which is
attached to a port by lldp med network-policy (interface) .
The network policy defines how LLDP packets are constructed.
Use the no form of this command to remove LLDP MED network policy.
Syntax
lldp med network-policy number application [vlan vlan-id] [vlan-type
{tagged | untagged}] [up priority] [dscp value]
no lldp med network-policy number
Parameters
• number—Network policy sequential number. The range is 1-32.
•
application—The name or the number of the primary function of the
application defined for this network policy. Available application names
are:
–
voice
– voice-signaling
– guest-voice
– guest-voice-signaling
– softphone-voice
– video-conferencing
– streaming-video
– video-signaling.
• vlan vlan-id —VLAN identifier for the application.