Dell PowerEdge VRTX - Manual (Page 574)

574 Voice VLAN Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Voice_VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Disable the voice VLAN before changing the voice VLAN trigger.
console(config)# voice vlan state disabled
console(config)# voice vlan state oui-enabled
<CR>
voice vlan id
Use the voice vlan id Global Configuration mode command to statically
configure the VLAN identifier of the voice VLAN. The no format of the
command returns the voice VLAN to the default VLAN (1).
Syntax
voice vlan id vlan-id
no voice vlan id
Parameters
vlan id vlan-id —Specifies the voice VLAN (range 1-4094).
Default Configuration
VLAN ID 1.
Command Mode
Global Configuration mode
User Guidelines
If the Voice VLAN does not exist, it is created automatically. It will not be
removed automatically by the no version of this command.
Example
The following example enables VLAN 35 as the voice VLAN on the device.
console(config)# voice vlan id 35
For Auto Voice VLAN, changes in the voice VLAN ID, CoS/802.1p,
and/or DSCP will cause the switch to advertise the administrative
voice VLAN as static voice VLAN which has higher priority than
voice VLAN learnt from external sources.