Snmp-server host – Dell PowerEdge VRTX User Manual
Page 187
SNMP Commands
187
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\SNMP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Example
The following example displays the configured SNMP filters.
snmp-server host
Use the snmp-server host Global Configuration mode command to configure
the host for SNMP notifications: (traps/informs). Use the no form of this
command to remove the specified host.
Syntax
snmp-server host
{host-ip | hostname} [traps | informs] [version {1 | 2c | 3
[auth | noauth | priv]}] community-string [udp-port port] [filter
filtername] [timeout seconds] [retries retries]
no snmp-server host
{ip-address | hostname} [traps | informs] [version {1 |
2c | 3}]
Parameters
• host-ip—IP address of the host (the targeted recipient). The default is all
IP addresses. This can be an IPv4 address, IPv6 or IPv6z address. See
•
hostname—Hostname of the host (the targeted recipient). (Range: 1–158
characters. Maximum label size of each part of the host name: 63)
•
trap—Sends SNMP traps to this host (default).
•
informs—Sends SNMP informs to this host. An inform is a trap that
requires acknowledgement. Not applicable to SNMPv1.
•
version
1—SNMPv1 traps are used.
•
version
2c—SNMPv2 traps or informs are used
console# show snmp filters user-filter
Name
OID Tree
Type
------------
user-filter
user-filter
user-filter
---------------------
1.3.6.1.2.1.1
1.3.6.1.2.1.1.7
1.3.6.1.2.1.2.2.1.*.1
---------
Included
Excluded
Included