Green ethernet, Green-ethernet energy-detect (global), Green-ethernet energy-detect (interface) – Dell PowerEdge VRTX User Manual
Page 397: 23 green ethernet
Template Last Updated - 2/7/2007
Green Ethernet
397
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
25
Green Ethernet
NOTE:
Some CLI commands or parameters described below are not applicable for
green-ethernet energy-detect (global)
Use the green-ethernet energy-detect Global Configuration mode command
to enable Green-Ethernet Energy-Detect mode globally. Use the no form of
this command to disabled it.
Syntax
green-ethernet energy-detect
no green-ethernet energy-detect
Parameters
N/A
Default Configuration
Disabled.
Command Mode
Global Configuration mode
Example
console(config)# green-ethernet energy-detect
green-ethernet energy-detect (interface)
Use the green-ethernet energy-detect Interface configuration mode
command to enable Green Ethernet-Energy-Detect mode on a port. Use the
no form of this command, to disable it on a port.