Dell PowerEdge VRTX - Manual (Page 697)

IPv6 Commands 697
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IPv6_Router.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
• ICMP redirects—The state of Internet Control Message Protocol (ICMP)
IPv6 redirect messages on the interface (the sending of the messages is
enabled or disabled).
• ND DAD—The state of duplicate address detection on the interface
(enabled or disabled).
• number of DAD attempts:—Number of consecutive neighbor solicitation
messages that are sent on the interface while duplicate address detection is
performed.
• ND reachable time—Displays the neighbor discovery reachable time (in
milliseconds) assigned to this interface.
• ND advertised reachable time—Displays the neighbor discovery reachable
time (in milliseconds) advertised on this interface.
• ND advertised retransmit interval—Displays the neighbor discovery
retransmit interval (in milliseconds) advertised on this interface.
• ND router advertisements—Specifies the interval (in seconds) for
neighbor discovery router advertisements sent on this interface and the
amount of time before the advertisements expire.
• ND advertised default router preference is Medium—The DRP for the
router on a specific interface.
• MLD Version—The version of MLD
• Tunnel mode—Specifies the tunnel mode: manual, 6to4, auto-tunnel or
isatap
• Tunnel Local IPv4 address—Specifies the tunnel local IPv4 address and
have one of the following formats:
–
ipv4-address
– ipv4-address (auto)
– ipv4-address ( interface-id )
• Tunnel Remote IPv4 address—Specifies the tunnel remote IPv4 address
Example 3. The show ipv6 interface command displays information about
the specified ISATAP tunnel:
console# show ipv6 interface tunnel 1