Dell PowerEdge VRTX - Manual (Page 409)

Template Last Updated - 2/7/2007 Address Table Commands 409
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
27
Address Table Commands
bridge multicast filtering
Use the bridge multicast filtering Global Configuration mode command to
enable the filtering of Multicast addresses. Use the no form of this command
to disable Multicast address filtering.
Syntax
bridge multicast filtering
no bridge multicast filtering
Default Configuration
Multicast address filtering is disabled. All Multicast addresses are flooded to
all ports.
Command Mode
Global Configuration mode
User Guidelines
When this feature is enabled, unregistered Multicast traffic (as opposed to
registered) will still be flooded.
All registered Multicast addresses will be forwarded to the Multicast groups.
There are two ways to manage Multicast groups, one is the IGMP Snooping
feature, and the other is the bridge multicast forward-all command.
Example
The following example enables bridge Multicast filtering.
console(config)# bridge multicast filtering