Dell PowerEdge VRTX - Manual (Page 707)

Template Last Updated - 2/7/2007 IPv6 Tunnel Commands 707
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
42
IPv6 Tunnel Commands
interface tunnel
Use the interface tunnel Global Configuration mode command to enter the
Interface Configuration (Tunnel) mode.
Syntax
interface tunnel number
Parameters
• number —Specifies the tunnel number.
Default Configuration
N/A
Command Mode
Global Configuration mode
Example
The following example enters the Interface Configuration (Tunnel) mode.
console(config)# interface tunnel 1
console(config-if)# tunnel source auto
console(config-if)# exit
tunnel isatap solicitation-interval
Use the tunnel isatap solicitation-interval Global Configuration mode
command to set the time interval between unsolicited router solicitation
messages. Use the no form of this command to restore the default
configuration.