Dell PowerEdge VRTX - Manual (Page 140)

140 Configuration & Image File Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Configuration_Image.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Default Configuration
Sensitive data is excluded if no method was specified
Command Mode
Privileged EXEC mode
User Guidelines
The location of the file system dictates the format of the source or
destination URL.
The entire copying process may take several minutes and differs from
protocol to protocol and from network to network.
IPv6z Address Format
If the IPv6 address is a Link Local address (IPv6z address), the outgoing
interface name must be specified. The format of an IPv6z address is: { ipv6-
link-local-address }%{ interface-id }. The subparameters are:
• ipv6-link-local-address —Specifies the IPv6 Link Local address.
• interface-id —{<port-type>[ ]<port-number>}|{port-channel |
po}[]<port-channel-number> | {tunnel | tu}[ ]<tunnel-number> |
vlan[ ]<vlan-id>
If the egress interface is not specified, the default interface is selected. The
following combinations are possible:
• ipv6_address % interface_id - Refers to the IPv6 address on the interface
specified.
• ipv6_address %0 - Refers to the IPv6 address on the single interface on
which an IPv6 address is defined.
• ipv6_address - Refers to the IPv6 address on the single interface on which
an IPv6 address is defined.
Invalid Combinations of Source and Destination
The following are invalid combinations of source and destination files:
• The source file and destination file are the same file.
•
xmodem: is the destination file. The source file can be copied to image,
boot and null: only.
• tftp:// is the source file and destination file on the same copy.