Show vlan multicast-tv – Dell PowerEdge VRTX User Manual
Page 569
VLAN Commands
569
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Example
The following example enables gi0/4 to receive Multicast transmissions from
VLANs 5, 6, 7.
console(config)# interface gi0/4
console(config-if)# switchport customer multicast-tv vlan
add 5-7
show vlan multicast-tv
Use the show vlan Multicast-tv EXEC mode command to display the source
and receiver ports of Multicast-TV VLAN. Source ports can transmit and
receive traffic to/from the VLAN, while receiver ports can only receive traffic
from the VLAN.
Syntax
show vlan Multicast-tv vlan
vlan-id
Parameters
•
vlan-id
—Specifies the VLAN ID.
Default Configuration
N/A
Command Mode
User EXEC mode
Example
The following example displays information on the source and receiver ports
of Multicast-TV VLAN 1000.
console# show vlan multicast-tv vlan 1000
Source Ports
------------
gi0/3, gi0/4
Receiver Ports
----------------------
gi0/1-2