Dell PowerEdge VRTX - Manual (Page 330)

330 802.1X Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\802_1X.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Syntax
dot1x guest-vlan enable
no dot1x guest-vlan enable
Parameters
N/A
Default Configuration
The default configuration is disabled.
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
The port cannot belong to the guest VLAN.
This command cannot be configured if the monitoring VLAN is enabled on
the interface.
The port is added to the guest VLAN as an egress untagged port.
If the authentication mode is single-host or multi-host, the value of PVID is
set to the guest VLAN_ID.
If the authentication mode is multi-sessions mode, the PVID is not changed
and all untagged traffic and tagged traffic not belonging to the
unauthenticated VLANs from unauthorized hosts are mapped to the guest
VLAN.
If 802.1X is disabled, the port static configuration is reset.
See the User Guidelines of the
dot1x host-mode command for more
information.
Example
The following example enables unauthorized users on gi0/1 to access the
guest VLAN.
console(config)# interface gi0/1
console(config-if)# dot1x guest-vlan enable