Exec-timeout – Dell PowerEdge VRTX User Manual
Page 239
Line Commands
239
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Line.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Command Mode
Line Configuration Mode
User Guidelines
When this command is enabled, it is activated as follows: connect the console
to the device and press the Enter key twice. The device detects the baud rate
automatically.
Example
The following example enables autobaud.
console(config)# line console
console(config-line)# autobaud
exec-timeout
The exec-timeout Line Configuration mode command sets the session idle
time interval, during which the system waits for user input before automatic
logoff. Use the no form of this command to restore the default configuration.
Syntax
exec-timeout
minutes
[
seconds
]
no exec-timeout
Parameters
• minutes—Specifies the number of minutes. (Range: 0-65535)
•
seconds—Specifies the number of seconds. (Range: 0-59)
Default Configuration
The default idle time interval is 10 minutes.
Command Mode
Line Configuration Mode