Dell PowerEdge VRTX - Manual (Page 431)

Address Table Commands 431
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Parameters
• mac-address—MAC address (Range: Valid MAC address)
•
vlan-id— Specify the VLAN
• interface-id—Specify an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel (Range: valid ethernet port,
valid port-channel)
• permanent—The permanent static MAC address. The keyword is applied
by the default.
• delete-on-reset—The delete-on-reset static MAC address.
• delete-on-timeout—The delete-on-timeout static MAC address.
• secure—The secure MAC address. May be used only in a secure mode.
Default Configuration
No static addresses are defined. The default mode for an added address is
permanent.
Command Mode
Global Configuration mode
User Guidelines
Use the command to add a static MAC address with given time-to-live in any
mode or to add a secure MAC address in a secure mode.
Each MAC address in the MAC address table is assigned two attributes: type
and time-to-live.
The following value of time-of-live is supported:
• permanent—MAC address is saved until it is removed manually.
•
delete-on-reset—MAC address is saved until the next reboot.
• delete-on-timeout—MAC address that may be removed by the aging
timer.
The following types are supported:
• static— MAC address manually added by the command with the following
keywords specifying its time-of-live:
–
permanent