Dell PowerEdge VRTX - Manual (Page 426)

426 Address Table Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
bridge multicast ipv6 forbidden source group
Use the bridge multicast ipv6 forbidden source group IInterface (VLAN)
Configuration mode command to forbid adding or removing a specific IPv6
source address - Multicast address pair to or from specific ports. Use the no
form of this command to return to the default configuration.
Syntax
bridge multicast ipv6 forbidden source ipv6-source-address group ipv6-
multicast-address {add | remove} {ethernet interface-list | port-channel
port-channel-list}
no bridge multicast ipv6 forbidden source ipv6-address group ipv6-
multicast-address
Parameters
• ipv6-source-address—Specifies the source IPv6 address.
•
ipv6-multicast-address—Specifies the group IPv6 Multicast address.
• add—Forbids adding ports to the group for the specific source IPv6
address.
• remove—Forbids removing ports from the group for the specific source
IPv6 address.
• ethernet interface-list —Specifies a list of Ethernet ports. Separate
nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen
to designate a range of ports.
• port-channel port-channel-list —Specifies a list of port channels. Separate
nonconsecutive port-channels with a comma and no spaces; use a hyphen
to designate a range of port channels.
Default Configuration
No forbidden addresses are defined.
Command Mode
Interface (VLAN) Configuration mode