Dell PowerEdge VRTX - Manual (Page 802)

802 DNS Client Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\DNS_Client.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Example
The following example deletes all dynamic entries from the DNS client
name-to-address cache.
console# clear host *
ip domain lookup
Use the ip domain lookup command in Global Configuration mode to
enable the IP Domain Naming System (DNS)-based host name-to-address
translation.
To disable the DNS, use the no form of this command.
Syntax
ip domain lookup
no ip domain lookup
Parameters
N/A
Default Configuration
Enabled.
Command Mode
Global Configuration mode
Example
The following example enables DNS-based host name-to-address translation.
console(config)# ip domain lookup
ip domain name
Use the ip domain name command in Global Configuration mode. to define
a default domain name that the switch uses to complete unqualified
hostnames (names without a dotted-decimal domain name).