Dell PowerEdge VRTX - Manual (Page 747)

ACL Commands 747
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\ACL.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Example
This example binds an egress ACL to a port:
console(config)# mac access-list extended server
console(config-mac-al)# permit 00:00:00:00:00:01 00:00:00:00:00:ff
any
console(config-mac-al)# exit
console(config)# interface gi0/1
console(config-if)# service-acl output server
time-range
Use the time-range Global Configuration mode command to define time
ranges for different functions. In addition, this command enters the Time-
range Configuration mode. All commands after this one refer to the time-
range being defined.
This command sets a time-range name. Use the
absolute and periodic
commands to actually configure the time-range.
Use the no form of this command to remove the time range from the device.
Syntax
time-range time-range-name
no time-range time-range-name
Parameters
time-range-name—Specifies the name for the time range. (Range: 1–32
characters)
Default Configuration
No time range is defined
Command Mode
Global Configuration mode