Show system – Dell PowerEdge VRTX User Manual
Page 109
System Management Commands
109
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\System_Management.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Example
The following example displays open Telnet sessions.
The following table describes significant fields shown above.
show system
The show system EXEC mode command displays system information.
Syntax
show system
Command Mode
User EXEC mode
Example
console#
show system
System Description:
System Type:
System Up Time (days,hour:min:sec): 03,02:27:46
console#
show sessions
Connection
----------
1
2
Host
-------------
Remote router
172.16.1.2
Address
----------
172.16.1.1
172.16.1.2
Port
-----
23
23
Byte
----
89
8
Field
Description
Connection
The connection number.
Host
The remote host to which the device is connected through a Telnet
session.
Address
The remote host IP address.
Port
The Telnet TCP port number.
Byte
The number of unread bytes for the user to see on the connection.