Dell PowerEdge VRTX - Manual (Page 377)

Ethernet Configuration Commands 377
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Ethernet.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
InBcastPkts Number of received broadcast packets.
OutOctets Number of transmitted octets.
OutUcastPkts Number of transmitted Unicast packets.
OutMcastPkts Nmber of transmitted Unicast packets.
OutBcastPkts Number of transmitted Broadcast packets.
FCS Errors Number of frames received that are an integral
number of octets in length but do not pass the FCS
check.
Single Collision Frames Number of frames that are involved in a single
collision, and are subsequently transmitted
successfully.
Multiple Collision Frames Number of frames that are involved in more than one
collision and are subsequently transmitted
successfully.
SQE Test Errors Number of times that the SQE TEST ERROR is
received. The SQE TEST ERROR is set in
accordance with the rules for verification of the SQE
detection mechanism in the PLS Carrier Sense
Function as described in IEEE Std. 802.3, 2000
Edition, section 7.2.4.6.
Deferred Transmissions Number of frames for which the first transmission
attempt is delayed because the medium is busy.
Late Collisions Number of times that a collision is detected later
than one slotTime into the transmission of a packet.
Excessive Collisions Number of frames for which transmission fails due to
excessive collisions.
Oversize Packets Number of frames received that exceed the
maximum permitted frame size.
Internal MAC Rx Errors Number of frames for which reception fails due to an
internal MAC sublayer receive error.
Received Pause Frames Number of MAC Control frames received with an
opcode indicating the PAUSE operation.
Field Description