Dell PowerEdge VRTX - Manual (Page 720)

720 IP Routing Protocol-Independent Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IP_Routing_MeS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
performed with the mask and the result is compared with 10.16.0.0. Any
destinations that fall into that range are displayed in the output:
console# show ip route 10.16.0.0 255.255.0.0 longer-prefix
Maximum Parallel Paths: 1 (1 after reset)
IP Forwarding: enabled
Codes: > - best, C - connected, S - static
IP Routing Table - 6 entries
Code IP Route Distance/ Next Hop Last Time Outgoing
Metric IP Address Updated Interface
------ ------------------- ----------- --------------- ------------- -----------------------
S> 10.16.2.0/24 110/128 10.119.254.244 00:02:22 vlan2
S> 10.16.2.64/26 110/128 100.1.14.244 00:02:22 vlan1
S> 10.16.2.128/26 110/128 110.9.2.2 00:02:22 vlan3
S> 10.16.208.0/24 110/128 120.120.5.44 00:02:22 vlan2
S> 10.16.223.0/24 110/128 20.1.2.24 00:02:22 vlan5
S> 10.16.236.0/24 110/129 30.19.54.240 00:02:23 vlan6
show ip route summary
Use the show ip route summary command in User EXEC or Privileged EXEC
mode to display the current contents of the IP routing table in summary
format.
Syntax
show ip route summary
Parameters
N/A.
Command Mode
User EXEC mode
Privileged EXEC mode