Dell PowerEdge VRTX - Manual (Page 609)

Link Aggregation Control Protocol Commands 609
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LACP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Default Configuration
The default port timeout value is Long.
Command Mode
Interface (Ethernet) Configuration mode
Example
The following example assigns a long administrative LACP timeout to
gi0/
1.
console(config)# interface gi0/1
console(config-if)# lacp timeout long
show lacp
Use the show lacp Privileged EXEC mode command to display LACP
information for all Ethernet ports or for a specific Ethernet port.
Syntax
show lacp interface-id [parameters | statistics | protocol-state ]
Parameters
• interface-id —Specify an interface ID. The interface ID must be an
Ethernet port
• parameters—Displays parameters only.
• statistics—Displays statistics only.
• protocol-state—Displays protocol state only.
Command Mode
Privileged EXEC mode
Example
The following example displays LACP information for
gi0/
1.
console# show lacp ethernet gi0/1
Port gi0/1 LACP parameters: