Dell PowerEdge VRTX - Manual (Page 725)

ACL Commands 725
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\ACL.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
no permit icmp {any | source source-wildcard} {any | destination
destination-wildcard} [any | icmp-type] [any | icmp-code]] [dscp number |
precedence number][ time-range time-range-name]
[log-input]
no permit igmp {any | source source-wildcard} {any | destination
destination-wildcard}[igmp-type] [dscp number | precedence number]
[ time-range time-range-name]
[log-input]
no permit tcp {any | source source-wildcard} {any|source-port/port-
range}{any | destination destination-wildcard} {any|destination-port/port-
range} [dscp number | precedence number] [match-all list-of-flags] [ time-
range time-range-name]
[log-input]
no permit udp {any | source source-wildcard} {any|source-port/port-range}
{any | destination destination-wildcard} {any|destination-port/port-range}
[dscp number | precedence number] [ time-range time-range-name]
[log-input]
Parameters
• permit protocol —The name or the number of an IP protocol. Available
protocol names are: icmp, igmp, ip, tcp, egp, igp, udp, hmp, rdp, idpr, ipv6,
ipv6:rout, ipv6:frag, idrp, rsvp, gre, esp, ah, ipv6:icmp, eigrp, ospf, ipinip,
pim, l2tp, isis. To match any protocol, use the ip keyword.(Range: 0–255)
• source —Source IP address of the packet.
• source-wildcard —Wildcard bits to be applied to the source IP address.
Use ones in the bit position that you want to be ignored.
• destination —Destination IP address of the packet.
• destination-wildcard —Wildcard bits to be applied to the destination IP
address. Use ones in the bit position that you want to be ignored.
• dscp number —Specifies the DSCP value.
• precedence number —Specifies the IP precedence value.