Dell PowerEdge VRTX - Manual (Page 429)

Address Table Commands 429
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
• port-channel port-channel-list —Specifies a list of port channels. Separate
nonconsecutive port-channels with a comma and no spaces. Use a hyphen
to designate a range of port channels.
Default Configuration
Forwarding of all Multicast packets is disabled.
Command Mode
Interface (VLAN) Configuration mode
Example
The following example enables all Multicast packets on port gi0/4 to be
forwarded.
console(config)# interface vlan 2
console(config-if)# bridge multicast forward-all add gi0/4
bridge multicast forbidden forward-all
Use the bridge multicast forbidden forward-all Interface (VLAN)
Configuration mode command to forbid a port to dynamically join Multicast
groups. Use the no form of this command to restore the default
configuration.
Syntax
bridge multicast forbidden forward-all {add | remove} {ethernet interface-
list | port-channel port-channel-list}
no bridge multicast forbidden forward-all
Parameters
• add—Forbids forwarding of all Multicast packets.
•
remove—Does not forbid forwarding of all Multicast packets.
• ethernet interface-list —Specifies a list of Ethernet ports. Separate
nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen
to designate a range of ports.