Dell PowerEdge VRTX - Manual (Page 483)

LLDP Commands 483
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
System capability legend:
B - Bridge; R - Router; W - Wlan Access Point; T - telephone;
D - DOCSIS Cable Device; H - Host; r - Repeater;
TP - Two Ports MAC Relay; S - S-VLAN; C - C-VLAN; O - Other
Port Device ID Port ID System Name Capabilities TTL
----- --------------- -------- ---------- ----------- ----
gi0/1 00:00:00:11:11:11 gi0/1 ts-7800-2 B 90
gi0/1 00:00:00:11:11:11 gi0/1 ts-7800-2 B 90
gi0/2 00:00:26:08:13:24 gi0/3 ts-7900-1 B, R 90
gi0/3 00:00:26:08:13:24 gi0/2 ts-7900-2 W 90
Example 2 - The following example displays information about neighboring
devices discovered using LLDP on port 1.
console# show lldp neighbors gi0/1
Device ID: 00:00:00:11:11:11
Port ID: gi0/1
System Name: ts-7800-2
Capabilities: B
System description:
Port description:
Management address: 172.16.1.1
Time To Live: 90 seconds
802.3 MAC/PHY Configuration/Status
Auto-negotiation support: Supported.
Auto-negotiation status: Enabled.
Auto-negotiation Advertised Capabilities: 100BASE-TX full duplex,
1000BASE-T full duplex.
Operational MAU type: 1000BaseTFD
802.3 Power via MDI
MDI Power support Port Class: PD
PSE MDI Power Support: Not Supported
PSE MDI Power State: Not Enabled
PSE power pair control ability: Not supported.