Dell PowerEdge VRTX - Manual (Page 369)

Ethernet Configuration Commands 369
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Ethernet.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Default Configuration
Jumbo frames are disabled on the device.
Command Mode
Global Configuration mode
User Guidelines
This command takes effect only after resetting the device.
Example
The following example enables jumbo frames on the device.
console(config)# port jumbo-frame
clear counters
Use the clear counters Privileged EXEC mode command to clear counters on
all or on a specific interface.
Syntax
clear counters [interface-id]
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
Default Configuration
All counters are cleared.
Command Mode
Privileged EXEC mode
Example
The following example clears the statistics counters for gi0/1.
console# clear counters gi0/ 1