Dell PowerEdge VRTX - Manual (Page 577)

Voice VLAN Commands 577
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Voice_VLAN.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Parameters
• src—QoS attributes are applied to packets with OUIs in the source MAC
address. See the User Guidelines of voice vlan oui-table .
• all—QoS attributes are applied to packets that are classified to the Voice
VLAN.
Default Configuration
The default mode is src.
Command Mode
Interface Configuration mode
Example
The following example applies QoS attributes to voice packets.
console(config-if)# voice vlan cos mode all
voice vlan cos
Use the voice vlan cos Global Configuration mode command to set the OUI
Voice VLAN Class of Service (CoS). Use the no form of this command to
restore the default configuration.
Syntax
voice vlan cos cos [remark]
no voice vlan cos
Parameters
• cos cos —Specifies the voice VLAN Class of Service value. (Range: 0–7)
• remark—Specifies that the L2 user priority is remarked with the CoS
value.
Default Configuration
The default CoS value is 5.
The L2 user priority is not remarked by default.