Fluke Biomedical 2MF Index - Manual (Page 38)

Index 2MF
Users Manual
6-4
3. Press the softkeys to raise ( O2+ ) or lower ( O2- ) as many times as needed to adjust
the SpO2 level.
Raising or Lowering the Pulse Rate
The Simulator also lets you adjust the pulse, for a customized virtual patient.
1. To raise the pulse rate five beats at a time, press the softkey BPM+.
esl035.eps
2. To lower the pulse rate five beats at a time, press the softkey BPM-.
esl036.eps
3. Press the appropriate softkey(s) as many times as needed to adjust the BPM.
Returning to Main Menu 1
To return to the Main Menu, press esc twice.
Using Preset Patient Conditions
The Simulator preset feature combines SpO2 levels, heart rates, signal strength, motion,
and pulse amplitude into 24 preset conditions, which simulate a broad range of normal
and abnormal patient conditions. The intent of this feature is to challenge the pulse
oximeter under test with a variety of patient conditions to show operation over a complete
range. The preset values are not meant for use as "clinical calls" and are generic in scope.