Fluke Biomedical 2MF Index - Manual (Page 73)

10-1
Chapter 10
Adjusting the LCD Screen
Introduction
Users may adjust the liquid crystal display (LCD) screen, increasing or decreasing the
contrast to accommodate different ambient lighting situations.
Note
This function is not the same as setting an ambient light artifact
(sunlight/artificial light) for oximeter testing under the Simulations menu.
The steps outlined here allow adjusting the screen contrast on the LCD
itself.
LCD Contrast Settings
To adjust the LCD contrast, access the Utilities menu directly from the Main Menu 2. To
access the Utilities menu, proceed as follows:
1. Press more on Main Menu 1.
fgg015.eps
The Main Menu 2 displays in LCD:
fgg161.eps