Fluke Biomedical 2MF Index User Manual
Page 57
Using Test Programs
Creating a Custom Test Program (Autosequence)
8
8-7
4. The name is limited to eight characters maximum. Continuing to press the softkey
→
eventually returns the cursor to the first character.
5. In the example below, the second position was changed (the letter “R” in PROG 1).
Press - to decrease the letter or number as in the example below until you reach the
letter L (notice that the R is now an L).
esl087.eps
6. Or, press + to increase the letter or number in sequence; as shown below, notice that
the L is now an O.
esl088.eps
7. When you have finished editing the program name, press
esc
. You will be asked if
you want to save the changes.
8. Press
Yes
to save or
No
to not save.
9. Press
esc
to return to the Autosequence menu.
esl089.eps
The Sequence screen appears on the LCD screen. The program name, if altered,
will follow the message “Sequence:” and display the new name.
esl090.eps