Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 133)

Section 7: Part Options 119
Repeat
The control has three built-in automatic repeat types: Straight, Staggered, and Nested.
Straight Repeat
Repeat Type
Allows the user to select which type of the three repeats to use: Straight, Staggered or Nested
Start Corner
Allows the user to select which corner of the plate from which to start the shape repeat.
Number of Rows
Program the number of rows to cut.
Number of Columns
Program the number of columns.
X Pattern Offset/Y Pattern Offset
The control automatically calculates the pattern offset based on the dimension of the current part in
memory.