Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 33)

Section 2: Overview 19
Show Certain Files
This softkey allows the operator to show only certain files from the selected directory. Both the
asterisk and question mark may be used in defining the files to show. The asterisk is generated by
holding down the left shift key and pressing the backspace key. The question mark is generated by
holding down the right shift key and pressing the backspace key.
Show All Files
This softkey allows the operator to undo the Show Certain Files from above.
Note: An optional Network Card for connecting directly to a PC Network for part file allocation is
available.