Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 194)

180 Operator’s Manual
Cut Setups
THC Voltage Offset
The THC Voltage Offset Parameter is used to offset the individual Sensor THC™ Arc Voltages
from the master set Arc Voltage. This allows the individual THCs to be adjusted to compensate
for consumable wear and obtain optimum cut quality.
Note: The THC Voltage Offset parameter may be automatically adjusted using the Volts per
Minute parameter of the Change Consumable feature. Please refer to the Change Consumable
information in this guide for additional details.