Hypertherm HTA Rev 6.00 Operators Manual User Manual

Page 154

Advertising
background image

140

Operator’s Manual


While the scroll bars are displayed, the view of the machine can be shifted horizontally and
vertically by holding down a shift key and pressing the arrow keys. This mode is useful in normal
cutting to closely follow the cut path while in zoom.

While cutting in sheet view, the control will automatically scroll to keep the cut location centered
within the view screen. This feature is useful in normal cutting to closely follow the cut-path while
zoomed in.

View Sheet is more useful when proper Plate Size values have been entered in Cutting setups
and when the machine has been previously homed. Viewing of large parts when fully zoomed
during a cut may not allow the part to be fully drawn on screen before moving onto the next view
location. This may appear as a flashing view screen and may be corrected by zooming out to get
a larger view area.

Change Manual Mode
This softkey changes the control Manual Mode from Move Only to Rip Cut and vice versa.
Pressing this softkey also causes the second softkey from the left to change function from Move
Distance to Cut Distance. Rip Cutting is described in more detail below.


Change Move Speed
Is used to toggle through the four Move Speeds available. The four Move Speeds are the
Maximum Machine Speed, High Jog Speed, Medium Jog Speed and Low Jog Speed from the
Speeds setups.

Advertising
This manual is related to the following products: