Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 161)

Appendix A: Mariner™ & Voyager II™ 147
Cutting
As previously mentioned, the Mariner™ and Voyager II™ Shape cutting controls support multiple
Cut and Marker processes. This allows the control to support different Plasma and Marker
systems with very different timing within a single part program. To select which process is to be
used by the control, a Plasma or Marker Select input is required. Please refer to the I/O
information in this Appendix for additional information on the Plasma Select and Marker Select
Inputs.