Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 171)

Appendix A: Mariner™ & Voyager II™ 157
Laser Process Monitoring
Maximum Ratio
The Automated Process monitoring uses sensors within the laser head to make adjustments
based on the ratio of the feedback from laser head sensors. The user sets the maximum and
minimum values for operation.
Minimum Ratio
The Automated Process monitoring uses sensors within the laser head and makes adjustments
based on the ratio of the feedback from these sensors. The user sets the maximum and
minimum values for operation.
Auto Adjust Speed
The Automated Process Monitoring controls the adjustments for speed of the operation. The
user selects how many times the Auto Adjust Speed process can automatically adjust.
Adjustment Delay
This sets the value for delays between process adjustments.
Over Combustion
This sets the value for detection of over combustion based on voltage from the laser head
sensors.
Loss of Cut
This sets the value for detection of over combustion based on voltage from the laser head
sensors.